Regular maintenance is essential for preserving both the longevity and aesthetic quality of your fittings. To maintain their condition, gently remove dust using a soft, dry cloth or duster, which helps protect the finish and extend the life of the fi

Regular maintenance is essential for preserving both the longevity and aesthetic quality of your fittings. To maintain their condition, gently remove dust using a soft, dry cloth or duster, which helps protect the finish and extend the life of the fittings.For deeper cleaning, lightly dampen a cloth with clean water and carefully wipe the surface. Follow this by using a separate, dry cloth to thoroughly remove any moisture, preventing water spots and enhancing the fitting&apos;s natural sheen.Some metal finishes may require specialised cleaning methods to restore their original appearance. Please refer to the below list for specific care instructions. Brass &amp; Bronze Over time, brass may naturally develop a patina due to exposure to the surrounding elements, even in indoor environments. To help slow this aging process, we recommend periodically rinsing the brass with clean water and gently wiping it with a soft cloth. Performing this routine every few months can aid in preserving its original appearance. Should the brass begin to darken with age, a suitable brass polish, such as Brasso, may be used to restore its natural lustre. However, please note this considered a natural part of the patina process.&#xA0;Aluminium Aluminium should be cleaned using only a damp cloth, with no solvents or detergents. It is important to avoid contact with fertilisers, chlorinated water, and other corrosive substances, as these may damage the finish over time.Stainless Steel Stainless steel benefits from occasional cleaning with a mild solution of warm water and detergent to remove surface buildup. After washing, rinse thoroughly with clean water and dry with a soft, lint-free cloth. For more persistent marks, a stainless-steel cleaner (in wipe or cream form) used with a non-abrasive cloth is appropriate.Chrome To maintain chrome&apos;s polished appearance, regular dusting is essential, as accumulated dust can lead to the appearance of rust over time. For general cleaning, use warm soapy water with a non-abrasive sponge or cloth. For more ingrained dust or buildup, a soft-bristled brush may be used. Always dry thoroughly after cleaning to prevent water spots and preserve the finish.

General Product Care Tips

To preserve the longevity and appearance of your outdoor fittings, we recommend performing maintenance every six months. Regular care helps protect against environmental factors such as dirt, carbon buildup, acidic residues, vegetation, and other atm

To preserve the longevity and appearance of your outdoor fittings, we recommend performing maintenance every six months. Regular care helps protect against environmental factors such as dirt, carbon buildup, acidic residues, vegetation, and other atmospheric pollutants.While the general maintenance guidelines for interior fittings also apply to exterior use, certain environments may require the use of specialized cleaning agents beyond water alone, depending on local conditions.Considerations for Coastal and Harsh Environments In coastal regions or areas affected by extreme weather, acid rain, or industrial pollution, more frequent maintenance may be necessary&#x2014;potentially several times per year. We recommend following the material-specific care instructions provided, adjusting the frequency based on the severity of exposure and the material&#x2019;s properties.For guidance on the suitability of materials in coastal or high-impact environments, we encourage you to consult our Coastal Care blog. If you&apos;re unsure of the materials used in your fittings, our Customer Service team is available to assist you at <a data-start="1251" data-end="1281" rel="noopener">info@lightingcollective.com.au</a>.Landscape Lighting For landscape lighting, follow the cleaning instructions appropriate for the fitting&#x2019;s material. It is especially important to regularly clean fittings that come into contact with chemicals from lawn treatments, decking, or vehicles, as these substances may compromise the structural integrity and finish of the fitting over time.Exterior Metal Fittings Even metals rated for outdoor use require routine maintenance. We recommend cleaning with warm, soapy water to remove surface grime and deposits. This practice ensures optimal performance and appearance.Exterior Concrete Fittings Concrete fittings installed outdoors should also be cleaned using warm, soapy water to eliminate surface residue.Important Note: Pressure cleaning is not recommended, as it may damage the fitting&#x2019;s surface and structure.

Caring for Exterior Lights

Painted FinishesTo maintain painted surfaces, gently clean with a soft, dry cloth. For more stubborn dirt, a cloth lightly dampened with clean water may be used. Always follow with a dry, soft cloth. Rattan, Wicker & CaneOur handcrafted rattan, cane,

Painted Finishes To maintain painted surfaces, gently clean with a soft, dry cloth. For more stubborn dirt, a cloth lightly dampened with clean water may be used. Always follow with a dry, soft cloth.Rattan, Wicker &amp; Cane Our handcrafted rattan, cane, and wicker fittings feature intricate weaving and binding techniques that may collect dust in crevices. To maintain their appearance, we recommend weekly dusting or using a vacuum cleaner with an upholstery brush attachment to reach more difficult areas.Fabric Fabric fittings should be kept away from areas prone to moisture, as damp environments can reduce their lifespan. Prolonged exposure to direct sunlight may also cause fading or degradation over time. To clean, gently remove dust using a fine brush or lint roller. For spot cleaning, use a soft, slightly damp cloth, dabbing along the grain. Do not immerse in water or use harsh cleaning agents.Cotton &amp; Linen To care for cotton or linen fittings, begin by removing dust with a soft brush, duster, or lint roller. For more thorough cleaning, use a damp cloth to gently wipe the surface. If the material loses its shape, a handheld steamer may be used to restore its original form.Wood Wooden fittings should be regularly dusted with a soft, dry cloth. For more detailed cleaning, a cloth slightly dampened with clean water may be used, followed by thorough drying with a separate cloth to avoid water spots and preserve the material&apos;s natural finish.<hr data-start="1970" data-end="1973">Proper care ensures longevity of your natural material fittings. Should you need personalised advice or product-specific recommendations, please contact our Customer Service team at info@lightingcollective.com.au<hr data-start="2165" data-end="2168">

Caring for Organic & Natural Materials

Porous materials such as plaster, ceramic, porcelain, and concrete require specific care to maintain their original appearance and structural integrity. It is important to avoid excessive use of water or cleaning agents, especially on untreated surfa

Porous materials such as plaster, ceramic, porcelain, and concrete require specific care to maintain their original appearance and structural integrity. It is important to avoid excessive use of water or cleaning agents, especially on untreated surfaces, to prevent staining or damage.<hr data-start="441" data-end="444">Plaster &amp; Ceramic For painted plaster surfaces, a slightly damp cloth may be used for gentle cleaning. Dust can be effectively removed with a soft, dry cloth or a fine-bristled brush. For bare plaster or ceramic, avoid using liquids. To remove marks, we recommend using a &quot;smoke sponge&quot; or a similar vulcanized rubber cleaning tool. Apply with care, using light pressure to avoid surface damage.<hr data-start="864" data-end="867">Porcelain Regular dusting should be performed as needed. For minor marks on unglazed or raw porcelain, a soft cloth used with mild soap or a non-abrasive cream cleanser is typically sufficient.<hr data-start="1070" data-end="1073">Concrete Interior concrete fittings generally require minimal maintenance. When cleaning is necessary, use a diluted solution of mild detergent in warm water to remove surface deposits. Rinse thoroughly with clean water and dry gently with a soft, lint-free cloth to prevent water stains.<hr data-start="1371" data-end="1374">By following these guidelines, you can help preserve the natural beauty and longevity of your porous material fittings. For further assistance or specific product inquiries, please contact our <a href="https://lightingcollective.com.au/pages/contact-us">Customer Service team.</a>

Caring for Porous Materials

Fitting Maintenance Guidelines. Regular maintenance is essential for preserving the quality, appearance, and longevity of your fittings. To protect the finish and extend their lifespan, we recommend routine dust removal using a soft, dry cloth or dus

<article dir="auto" data-testid="conversation-turn-2" data-scroll-anchor="true" id="isPasted"><div tabindex="-1"><div data-message-author-role="assistant" data-message-id="ac08cd80-bcd5-408f-a9ef-2b5b02ac4801" dir="auto" data-message-model-slug="gpt-4o">Fitting Maintenance GuidelinesRegular maintenance is essential for preserving the quality, appearance, and longevity of your fittings. To protect the finish and extend their lifespan, we recommend routine dust removal using a soft, dry cloth or duster.For fittings requiring additional care, a lightly moistened cloth with clean water may be used for a more thorough cleaning. Ensure the surface is completely dried afterward with a separate, soft cloth to eliminate water spots and enhance the overall shine.Please note that specific metals may require tailored cleaning methods to maintain their original appearance. Below are material-specific care recommendations:<hr data-start="759" data-end="762">Brass &amp; Bronze Over time, brass may naturally develop a patina due to exposure to air, even in indoor environments. To help slow this aging process, gently rinse the brass with clean water and wipe it with a soft cloth every few months. Should the brass darken with age, a brass polish such as Brasso may be used to help restore its original luster.<hr data-start="1116" data-end="1119">Aluminium Aluminium should be cleaned with a damp cloth only. Avoid using solvents or detergents, as these can damage the surface. Exposure to substances like fertilizers, chlorinated water, or other chemicals should be avoided to prevent corrosion.<hr data-start="1378" data-end="1381">Stainless Steel Clean stainless steel fittings every few months using a mixture of warm water and mild detergent. Rinse thoroughly with clean water and dry immediately with a soft, clean cloth. For deeper cleaning, a stainless-steel cleaner (wipe or cream) can be applied with a non-abrasive cloth.<hr data-start="1689" data-end="1692">Chrome Frequent dusting is important to maintain the finish of chrome fittings. Accumulated dust can lead to the appearance of rust if not addressed. For cleaning, use warm, soapy water and a non-abrasive cloth or sponge. For more persistent dust or dirt, a soft-bristled brush may be used. Always dry the surface thoroughly to prevent watermarks and preserve the chrome&#x2019;s shine.<hr data-start="2080" data-end="2083">If you have any additional questions or specific care needs, please do not hesitate to contact our <a href="https://lightingcollective.com.au/pages/contact-us">Customer Service team</a>.<hr data-start="2273" data-end="2277"> </div></div></article> <div type="button" data-state="closed"><form data-type="unified-composer"> <script nonce>window.__oai_logHTML?window.__oai_logHTML():window.__oai_SSR_HTML=window.__oai_SSR_HTML||Date.now();requestAnimationFrame((function(){window.__oai_logTTI?window.__oai_logTTI():window.__oai_SSR_TTI=window.__oai_SSR_TTI||Date.now()}))</script><div contenteditable="true" translate="no" data-virtualkeyboard="true" spellcheck="false"> </div></form></div>

Caring for Metal Fittings

Chat to one of our friendly Customer Service agents...

Can't find what you need? Please contact us and we will get back to you as soon as we can!

Lighting Collective

Lighting Collective - Product Care Guide

Product Care Guide

Is the full range of items available on display in the Showroom?

How can I view an item that is not currently on display?

What are the opening hours of the Showroom?

Is your Showroom open to the public?

Byron Bay Showroom

Joining our Trade Program

Am I eligible for a trade account?

Trade Program